1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Influence of switchable magnetic field on the modulation property of nanostructured magnetic fluids

Magnetic fluid is a kind of colloidal material with tunable microstructure and unique optical properties. The tunable magneto-optical modulation property of magnetic fluid under externally switchable magnetic field with various modulation periods is investigated theoretically and experimentally. The transitional modulation period (lower limit of the working frequency) between the square-like and oscillation-like modulation is achieved and found to be magnetic-field- and sample-concentration-dependent. The modulation mechanism is analyzed and ascribed to the dynamic microstructure of magnetic fluid under different modulation periods of external magnetic fields. The result of this work may be helpful for the pragmatic applications of magnetic fluid based on the square-like modulation.     

Weak attractors for the dissipative fractional Heisenberg equation

In this short paper, we consider the long time behaviors of the fractional Heisenberg equation and the existence of a global weak attractor is proved for the shift dynamics in the path space. The key ingredient is some new type of commutator structure introduced in this paper, which seems indispensable in proving the compactness of the dynamics. The technique introduced in this paper may also be useful to other fractional order partial differential equations.     

Power scaling of blue and red light based on frequency mixing inside adhesive-free bond composite Nd:YAG laser cavity

We report our results on effective third-harmonic generation (THG) by cascading quasi-phase-matched second-harmonic and sum-frequency generation in a dual-period-periodically-poled KTP crystal. Significant improvement of the output powers were achieved for the 440 nm blue light and 660 nm red light based on Q-switched frequency-tripling and frequency-doubling 1319-nm radiation inside an adhesive-free bond composite Nd:YAG laser. The highest output powers of 197 mW and 1.19 W were achieved for the blue and red light at the corresponding input powers of 12.9 and 17.1 W for the diode laser.     

Coherent Beam Combination of Eight Watt-Level Polarization-Maintained Fiber Amplifiers

We demonstrate the coherent beam combination of eight Watt-level polarization-maintained fiber amplifiers. The phase control signal of each amplifier is generated by running a stochastic parallel gradient descent algorithm on a digital signal processor （DSP）. The experimental result shows that the whole system in close-loop performs well for long-time observation. Energy encircled in the target pinhole is 6.68 times more than that in open-loop. The combination efficiency is as high as 84.5%.     

Addition reaction and characterization of chlorotris(triphenylphosphine)iridium(I) on silicon(1 1 1) surfaces

Studies were performed to determine the chemical addition of a metal complex molecule, chlorotris(triphenylphosphine)iridium(I), on hydrogen passivated Si(1 1 1) surfaces to form a self-assembled monolayer (SAM). The iridium complex was synthesized prior to chemical addition, for which modified reaction conditions were chosen. Following addition, the silicon surfaces were characterized with X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The XPS results revealed that the surfaces consisted of the expected elemental percentages and that the iridium has a slightly higher success rate at attaching to oxide-free surfaces. XPS data also strongly indicate that the iridium complex remained intact upon chemisorption and did not decompose during the addition reaction. CV data show a difference between iridium treated surfaces and control samples. Hydrogen passivated wafers with iridium complex were much more conductive than those which were terminated with just an oxide or with an oxide and iridium complex. Furthermore, no free iridium reagent was detected as an additional feature in the current profile, indicating there was no physisorbed layer.     

Formation and tribological properties of two‐component ultrathin ionic liquid films on Si

Several single‐component and two‐component imidazolium ionic liquids (ILs) ultrathin films were formed on Si substrates by a dip‐coating and heat treatment process. The formation and surface properties of the films were analyzed by means of ellipsometric thickness measurement, X‐ray photoelectron spectra and atomic force microscope. The adhesive and nanotribological behaviors of the films were evaluated by a homemade colloidal probe. A ball‐on‐plate tribometer was used to test the microtribological performances of these films. As a result, the two‐component ILs ultrathin film containing 80% solid‐like ILs phase shows more homogenous surface morphologies and optimal micro/nano‐tribological properties as compared to single‐component ILs films, which is ascribed to a synergic effect between the steady solid‐like ILs phase as the backbone and the proper amount of flowable liquid‐like ILs phase. By studying the influence of various solid/liquid ILs ratios on tribological properties of the two‐component ILs films, we might find the way to design ILs films with excellent comprehensive tribological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Catalytic activity of chiral chelating N-heterocyclic carbene palladium complexes towards asymmetric allylic alkylation

Abstract

The catalytic activity of a series of chiral heteroaryl coordinated chelating N-heterocyclic carbene (NHC) palladium complexes towards asymmetric allylic alkylation (AAA) were presented here. The effects of different N-substituents, NHC backbones and chelate rings on the catalytic activity and the enantioselectivity of the alkylation of (E)-1,3-diarylallyl acetates with dialkyl malonate were investigated. The results showed that, under the optimized conditions, complexes 3a, 3b, and 3i carrying the pyridinyl-coordinated five-membered chelate ring showed high catalytic activity and chiral induction efficiency. The corresponding alkylated products were obtained in high yields with moderate ee. Furthermore, it was found that the substituents of (E)-1,3-diarylallyl acetates and the type of the nucleophile affect the results as well.     

Metal-free synthesis of (E)-vinyl sulfones via denitrative coupling reactions of β-nitrostyrenes with sodium sulfinates

Abstract

A practical metal-free procedure for the synthesis of (E)-vinyl sulfones has been developed through the coupling of β-nitrostyrenes with sodium sulfinates under microwave irradiation. This methodology provides a convenient and efficient approach to various (E)-vinyl sulfones from readily available starting materials with excellent regioselectivity. The present oxidative reaction involves an efficient denitrative radical cross-coupling of β-nitrostyrenes with sodium sulfinates via using AcOH as an additive.